Axes/Axis Setup
The machine axes can be configured and set-up to meet your exact requirements. The BAHMUELLER modular design enables us to divide the X- and Z-axis in two independent axes or X- and Z-axis could be configured as a cross slide system.

Multiple processes
Processes are customized to suit your application. The modular set-up allows highest flexibility in the IPRO. Grinding bores and faces, or using an additional finishing process, are all possibilities to optimize efficiency and minimize floor space used, as well as reducing capital outlay. Hydrostatic linear guide system with ‘full contact‘ guide and fluid regulation.

High frequency spindles
Spindle diameter 80 - 150 mm
Hybrid bearing for long life cycle
Up to three (3) spindles on one single slide.

Rotational speed range
Grinding spindle 6000-180,000 1/min
Workpiece spindle head up to 6000 1/min

Oscillation and taper compensation
A hydrostatic short stroke oscillation unit can be added as an additional axis. A water cooled
linear drive with absolute linear encoders (glass scales) guarantees highest quality.

Advantage:
Using an oscillation unit verses oscillating via Z-axes and X-axes results in no interpolation diviation.
Taper compansation at the grinding tool(s) utilizing a CNC controlled B-axis.
Smallest programmable increment: 0.1 µm
Maximum traverse: 10 mm
Angular accuracy: 0.03 minutes