At the workpiece spindle head our precision angular ball bearing guarantees concentricitiy accuracy of 0.3 µm.

Grinding non round profiles?
The addition of a CNC controlled C-axis can be the solution for grinding non-cylindrical workpieces.

The possibilities are highly diverse and flexible.

Challange our expertise for your manufacturing solutions!

Locating in a ,V-block‘ fixture

No workpiece spindle head, no tailstock A well-proven work holding fixture where the workpiece is located on diamond (or carbide) inserts and driven against an axial deadstop by rollers set at an angle.
Loading / unloading workpieces into the V-block fixture via high speed loading device.
The machine axes can be configured and set-up to meet your exact requirements.

The BAHMUELLER modular design enables us to divide the X- and Z-axis in two independent axes or X- and Z-axis could be configured as a cross slide system.

The X- axis for external grinding has the flexibility to swivel between 0 and 30 degrees.

BAHMUELLER incorporates hydrodynamic and hydrostatic guide systems as part of the machine construction.

The use of absolute linear encoders (glass scales) allows exact positioning within 0,0001mm.

Multiple grinding tools are mounted on top of the axes for processing of several features in one single clamping.

The external grinding spindle head can be equipped with a single or stacked configuration.

The slides for internal grinding can be fitted with 1 or 2 high-frequency spindles.